Tag Archive: unlock iPhone for free


Unlock iPhone 4

UNLOCKING iPHONE4
These are instructions on how to unlock the iPhone 4, iPhone 3GS, and iPhone 3G for use with any GSM cellphone carrier using UltraSn0w. This will work with the iOS 4.0 – 4.0.1 firmware.
Before you can follow these instructions you must have a jailbroken iPhone and you must be on the 04.26.08, 05.11.07, 05.12.01, 05.13.04, or 01.59 baseband(modem firmware).
Step One
Press to launch Cydia Installer from your SpringBoard.
Step Two
Press to select the Manage tab at the bottom of the screen.
Step Three
Press to select the large Sources button
Step Four
If the ultrasn0w repo is not present press the Edit button at the top right of the screen. Otherwise, skip to Step Nine.
Step Five
Press the Add button at the top left of the screen
Step Six
Enter http://repo666.ultrasn0w.com/ as the source url and press the Add Source button.
Step Seven
Once the source has been added press the large Return to Cydia button.
Step Eight
Press the Done button at the top right of the screen.
Step Nine
Press to select repo666.ultrasn0w.com from the list of user entered sources.
Step Ten
Press to select ultrasn0w from the list of packages
Step Eleven
Press the Install button at the top right of the screen.
Step Twelve
Press the Confirm button at the top right of the screen.
Step Thirteen
After installation completes successfully press the large Return to Cydia button.
Step Fourteen
Now press the Home button then power off and power on the iPhone. You do this by holding down the power button for 3 seconds then moving the power slider that appears to the right.
Press the power button again to turn on the phone.
Step Fifteen
You should now be able to insert the SIM of your choice!

credit to iClarified.

Advertisements

3GS jailbreak & unlock

Hello there, geohot’s blackra1n is awesome application.

Did the job with my 3G(S) out of the box with 3.1.2 on board (bb 5.11.07) within 20 sec.

Now, info for all those who tried reboot and get stuck with DFU (arrow&iTunes) – all iPhone 3G(S) with 3.1.2 (starting with MCxzx) and iPT3 are tethered JB only! That means if you run out of battery or reboot/switch off your iTHING you’ll need to connect to your PC and run blackra1n again to boot up your iTHING.

Saw few post saying that geohot is a loser,etc… I DO NOT agree with them, as many of them DIDN’T read his full statement on his twitter :